MIL-W-15805F(SHIPS)
4.3.5 Group A and group B tests. - The results
accordance with table II and shall be subjected to the
of each test shall be completed with the requirements
group B test specified in 4.4 with quality conformance
of this specification. Failure to conform to the re-
based on the requirements of MIL-STD-105.
quirements for any test shall be counted as a defect
Table II - Sampling for group B tests. .
and the equipment shall not be offered for delivery.
If the number of such nonconforming equipments in
[Number of equipments
any sample exceeds the acceptance number for that
nonconforming on
Number of
Number of
sample, this shall be cause for the rejection of the
any group B test)
equipments in equipments
lot represented by the sample.
Inspection lot in sample Acceptance Reject ion
number
number
4.3.6 Group C hests.- The results of each test
shall be compared with the requirements of this
All
3 and under
specification. In the event of failure to conform to
1
3
o
4 to 15
the requirements of this specification for any group
1
16 to 40
5
0
C test, the contractor shall correct the cause of
1
7
41 to 110
0
failure on future production units and repair the
1
10
0
111 to 300
deficiency on all equipments produced on the contract
1
2
15
301 to 500
or order.
2
3
25
501 and over
4.4 Quality conformance inspection - The sam-
4.3.4 Sampling for group C tests. - Group C
ples specified in 4.3.2, 4.3.3, and 4.3.4 shall be
tests will be required by the bureau or agency con-
subjected to the following group A, group B, and
cerned when the basic design of the equipment or the
group C tests, as applicable. Tests shall be per-
material of a vital part has been changed. One com-
formed in general in the order listed.
plete equipment shall be selected and subjected to
each of the group C tests listed in 4.4.
Test
Requirement
paragraph
paragraph
Test
Group A
Operating
4.5.1
3.3.1
All except crosswind and headwind equipment
4.5.1.5
3.4.5
Crosswind and headwind equipment
Group B
Supply line voltage and frequency
MIL-I-983
3.3.1
variation
Group C
MIL-I-983
3.3.1
Airborne noise
Accuracy (first part)
4.5.2.1
3.3.2
All except crosswind and headwind equipment
4.5.1.5
3.4.5.2
Crosswind and headwind equipment
MIL-I-983
3.3.1
Radio frequency noise interference
MIL-I-983
3.3.1
Temperature and humidity
MIL-I-983
3.3.1
Inclination
MIL-I-983 and
3.3.1
Accelerated life
4.5.3
4.5.4
3.4.2
Angular displacement retransmission
Sensitivity
4.5.4
All except crosswind and headwind equipment
3.4.2.1
4.5.1.5
3.4.5.3
Crosswind and headwind equipment
4.5.2.2
3.3.2
Accuracy (second part)
See footnote on next page.
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business